© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-11-2002, 07:10 PM | #1 |
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
crane 1.7's installed, now need help on valve covers
what exactly do i need to do to clear the rockers with stock valve covers? i have tools, grinders, i took the baffle out in the pass side, is that all i need to do, need quick help. thnx in advance
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
11-11-2002, 07:59 PM | #2 |
Registered Member
Join Date: Aug 2002
Location: Jacksonville,Fla.
Posts: 134
|
Get the double thick gaskets also,they add another 3/8 clearance,with 1.7's it will be close.
__________________
Jack 1989 Mustang LX: Converted to Carb.650 AED Holley DP,Weiand Stealth Intake,Edelbrock Performer RPM Aluminum Heads,Hooker Super Comps, Ground Pounder Uppers and Lowers,Moroso Drag Springs,NEW COMP Xtreme Energy Cam and 1.6 RR. ,a few other goodies.*** New 1/4 times-12.50 1987 SC GT ( fast as hell) 2001 Powerstroke Tow Vehicle 1989 Coupe. Sometimes when you cry,no one sees your tears.......... Sometimes when you are happy,no one sees your smile......... But,FART just ONE time.......... |
11-11-2002, 09:53 PM | #3 |
Registered Member
Join Date: Aug 2002
Location: Bloomsburg,PA
Posts: 34
|
all you have to do is gring the casting posts off of the vavle covers. You do not need to grind the ones with the bolt holes just make everything flush inside exept the were the bolt holes are.
|
11-12-2002, 06:50 AM | #4 |
Registered Member
Join Date: May 2001
Location: Harrisburg, Pennsylvania
Posts: 379
|
coupe ....i have crane 1.7s on mine ......with a stock cam i didn't have to do anything but remove the baffle
when you remove the baffle though ,you have to do somthing to keep the oil from splashing up to the vac line attached to the filler neck.........i've heard it said that it'll suck oil in the intake some i just moddified the origanal baffle (bfh and drill),put it back on ... no other modifacations were needed
__________________
the "not so old",old guy 87 Mustang GT T-top >hanlon t-5, pro 5.0, centerforce clutch ,adj. cable/quatrant ,3.27s ,full 2 1/2 ex(off road H) adj. reg. ,e-cam ,70mm TB, cobra intake ,1.7rr ,ported/milled e7ets w/crane springs ,306 balaced/decked short block w/speed pro forged flat top pistons ...257rwhp/302rwt best et 13.7@102 (4/11 ) '80 Capri (future project,currently collecting parts for 351 moter) |
11-12-2002, 12:08 PM | #5 |
Registered Member
Join Date: Mar 1999
Location: Jackson, LA
Posts: 264
|
all i did was remove the baffle and it worked great for me. i also have a crane 2031 and i still do not have problems
__________________
GT-40X heads(58cc), Cobra upper and lower, 75 mm Bullet, Moroso fenderwell induction, FRPP 65mm TB, 24# injectors, black magic electric fan, phenolic spacer, 1.7 crane cobra roller rockers, crane 2031, BBK 1 5/8 equal length hearders, 2.5 inch off road pipe, 2.5 flowmaster catback, FMS 3.55 gears, T5-Z transmission, FRPP aluminum driveshaft, svo heavy duty clutch, mcleod bullet proff bellhousing, BBK adjustable cluth quadrant, hurst billet shifter, lakewood subframes, BBK strut tower brace, BBK 2pt lower cross bar, FMS 190 lph fuel pump, crane ps91 coil, FMS street pulleys, and 300+ race wires. All thanks goes to my wife sheri, jason, jeff, robby, my dad and all others you helped contribute. most importantly GOD!!! |
11-13-2002, 09:01 AM | #6 |
Registered Member
Join Date: Mar 2000
Location: Stroudsburg, PA, USA
Posts: 150
|
when i put my crane 1.7's on i put tall motorsports covers on and they hit the bottom of the intake manifold so i put on a 1 inch spacer and it is still close but its good.
__________________
88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears |
11-14-2002, 09:12 PM | #7 | |
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
Quote:
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Painted valve covers | surfbeast | Modular Madness | 3 | 04-23-2003 08:19 PM |
Valve Covers | NotchJohnson | Windsor Power | 20 | 10-17-2002 12:01 PM |
1.7's and valve covers, HELP! | srv1 | Windsor Power | 9 | 09-02-2002 10:37 PM |
tfs intake, tfs valve covers, NOTHING FITS | 93GTDIN | Windsor Power | 9 | 07-01-2002 12:22 PM |
1.7's and valve covers | matt cook | Windsor Power | 0 | 03-14-2001 12:52 PM |