Rear brake blocks before front break

nielsmobers · 10-06-2003, 05:30 AM

Is there some mechanisme that measures the brake pressure between the front and the rear brake. My rear brake blocks before the front brake. Does something measure how much pressure is applied to the rear suspension so that the brake pressure can be adjusted to that. I think my rear suspension is weakening which causes the rear lower. I tried to pump it up by pumping up the dampers (air dampers), but it does not seem to help.

rtschoneman · 10-06-2003, 07:48 AM

its called a proportioning valve. you can get an adjustable for 50 inan after market book. have you added discs or modified??

nielsmobers · 10-06-2003, 12:23 PM

i have a '72 Grande and as far as I know disk brakes are standard, I haven't modified anything. Can you explane why I should use an adjustable, shouldn't the original have to work properly?

mustangman65_79 · 10-06-2003, 02:26 PM

First u need to find out of the disk came stock.

If they didn't, then u need to buy a new master cylinder, and proportioning valve.

If they were stock, then my guess u either have air in the front, or u need a new master cylinder. Proportioning valves really never go out, all they do is limit the amount of fluid to certain parts. But make sure u do have one installed.

10-06-2003, 05:30 AM	#1
nielsmobers Registered Member Join Date: Jul 2002 Location: Holland Posts: 28	Rear brake blocks before front break Is there some mechanisme that measures the brake pressure between the front and the rear brake. My rear brake blocks before the front brake. Does something measure how much pressure is applied to the rear suspension so that the brake pressure can be adjusted to that. I think my rear suspension is weakening which causes the rear lower. I tried to pump it up by pumping up the dampers (air dampers), but it does not seem to help.

10-06-2003, 07:48 AM	#2
rtschoneman Registered Member Join Date: Mar 2003 Location: poc, ID Posts: 16	brakes its called a proportioning valve. you can get an adjustable for 50 inan after market book. have you added discs or modified?? __________________ rtschoneman

10-06-2003, 02:26 PM	#4
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	First u need to find out of the disk came stock. If they didn't, then u need to buy a new master cylinder, and proportioning valve. If they were stock, then my guess u either have air in the front, or u need a new master cylinder. Proportioning valves really never go out, all they do is limit the amount of fluid to certain parts. But make sure u do have one installed. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
87-93 Cervini Stalker Front Bumper and Cobra Rear Bumper	EVLHRSE	Windsor Power	3	03-01-2004 11:23 AM
Rear Disk brake installation question	sgwinn	Windsor Power	0	05-07-2001 12:02 PM
Rear disk brake conversion problems	BLOCKER	Windsor Power	6	04-02-2001 06:10 PM
Rear disk Brake conversion	BLOCKER	Windsor Power	7	03-21-2001 10:02 PM
Turbo Coupe Rear End	QuantumMotorsports	Windsor Power	6	03-16-2001 01:54 PM

10-06-2003, 12:23 PM	#3
nielsmobers Registered Member Join Date: Jul 2002 Location: Holland Posts: 28	i have a '72 Grande and as far as I know disk brakes are standard, I haven't modified anything. Can you explane why I should use an adjustable, shouldn't the original have to work properly?