© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-04-2001, 08:01 PM | #1 |
Registered Member
Join Date: Jul 2000
Location: knoxville,tenn,usa
Posts: 163
|
question on the 7.5 rear
i was just wandering if anyone might have a guess as to what gears a 7.5 would have in it coming from a auto 4 banger car? i have to use this rear till i can muster the money up to get my 8.8.. with my mods i hope this thing will hold up i have everything for my 8.8 i just the need the darn thing plus i figure while i am breaking the car in i wont be getting on it real hard.. thanx
------------------ 84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's |
06-07-2001, 10:00 PM | #2 |
Guest
Posts: n/a
|
I think they are 3.45 or something in that neighborhood. On a friends (87LX)4-8 swap, he ran the 7.5 until he got his 8.8 and ran an 8.44 in the 1/8 mile. He held up the whole time until he got his 8.8 with 4.10's...
------------------ Mike Sold my 88GT Aug Y2K Just got T-top 86GT 11-18-2000 |
06-07-2001, 11:03 PM | #3 |
Registered Member
Join Date: Jul 2000
Location: knoxville,tenn,usa
Posts: 163
|
thanks i have also heard that it should hold up if not gives me even more of a reason to get that 8.8 put in lol thanx again
------------------ 84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's |
06-09-2001, 12:28 AM | #4 |
Registered Member
Join Date: May 2001
Location: Amarillo, Texas, 79107
Posts: 78
|
Don't talk yourself into thinking the 7.5 will last very long. I happened to have a couple of em so that's what I used behing a Cleveland. Each one lasted about 5 months before making clunking noises once in a while. Both let go with a really loud BANG. Just got a new (79) LX that happened to have an 8.8 in it. hopefully it will take everything the new cleveland will throw at it. By the way, the 7.5 out of the 82 GT was a 3:08 while the 4 banger rear wsa 3:27 I think.
|
06-09-2001, 03:54 AM | #5 |
Registered Member
Join Date: Jun 2000
Location: sanantonio, Tx, usa
Posts: 1,407
|
Oldman, i think u just answered my question, my friends 85 coupe, was a ex-4banger, and we are not sure if its an 8.8 or 7.5, but i was gonna ask about a "clunking" noise we hear? it does have e.t. streets on the back, and i was sure those stickies would break a 7.5 pretty quick? also has alum d/s, what you think? how can i tell?...thnx
------------------ 90 lx coupe: 175k miles, steeda water pump pully, hurst shifter, Mac cold air fenderwell, accel supercoil, ADS chip, aluminum D/S, Black magic fan, 3.27grs. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods: subframes, mac h-pipe |
06-09-2001, 04:03 PM | #6 |
Sober voice of Reason
Join Date: Nov 1998
Location: Kelowna, B.C., Canada
Posts: 1,514
|
The 7.5 has a straight top and bottom edge on the diff. cover and the sides are curved, all 4 edges of the 8.8 cover are the same. There should be a tag on one of the bolts holding the cover on the rear that will have 7 5(the size of the ring gear) and the gear ratio after, 308 or whatever it may be.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear end question | Vishnoff | Classic Mustangs | 2 | 10-17-2003 03:47 PM |
Rear axle removal question | BLACK85GT | Windsor Power | 2 | 01-06-2003 09:08 PM |
88 GT - rear exhaust question | Mustang_289 | Windsor Power | 3 | 09-11-2001 08:08 AM |
question on fuel system and rear gears and launching | vetteeatr | Windsor Power | 1 | 08-12-2001 05:28 PM |
just bought a new rear end and have question | Z28EATR | Blue Oval Lounge | 2 | 04-05-2001 08:25 PM |