© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-02-2001, 03:56 AM | #1 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
!!! Eibach Drag Launch Springs !!!
Well I got them in with the 70/30's up front and 50/50's in the back. Traction is definalty much better, but the sad thing is my car looks like a 4x4 now. It sits so high! especially on the right side. I dont know why. Traction is definatly much improved! And handling isn't all that terrible. The car just doesnt look that good anymore.
Oh well. It only spins half of 1st gear now though, instead of till 3rd. Its funny, it makes it feel slower when it doesnt burn the tires. Skyler ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. -Videos (MPEG)- 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) Tire Smoking Burnout! (218k) |
03-02-2001, 05:43 AM | #2 |
Guest
Posts: n/a
|
The front-end will definately sit higher SKY but the end result as you've said,is much better weight transfer,which is what you want.
Wheelspin remember,is not getting you anywhere....even though it looks cool putting up lots of smoke ------------------ Paxton Blown 87GT |
03-02-2001, 10:39 AM | #3 |
Registered Member
Join Date: Apr 1999
Location: Cincinnati,OH
Posts: 1,511
|
Sweet sky! Now get that thing to the track and get some new 1/4 mile times.
------------------ 89GT,T-5Z, D.S.S. 306 shortblock w\main support, B-303 cam, Cobra intake, GT40P heads, 1.72rr, MAC "P" headers, MAC off-road H-Pipe, MAC true-fit w\tips, 373's...and the list goes on! Throttle Junkie Powered by Ford! 12.824 @ 107.05 MPH PVT Blankenship leaving for BCT 14MAR01 MOS 67 Romeo |
03-02-2001, 10:42 AM | #4 |
Procharged!
Join Date: May 1999
Location: Hanover, PA
Posts: 1,539
|
HUH??!?! It lowered my car all around @1"-1.5" and it is very light in the front. How much lower did your Racecrafts lower your car. As for the RH side being high, how much air is in your bag? Run arounf 9psi to start on the street, if it leaves crooked increase the bag pressure. My SSM bars did lower the point in the back a little, I guess this helped me a little but I am stumped on the front. Can you post a pic of before and after?
------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98 |
03-02-2001, 03:54 PM | #5 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Rick- Yeah I will take some pictures of it with the digital camera tomrrow and post em both. Maybe you can help me out on this, cuz it looks horrible!
Skyler ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. -Videos (MPEG)- 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) Tire Smoking Burnout! (218k) |
03-02-2001, 07:01 PM | #6 |
Registered Member
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
|
WOW! It raised the car! They told me it would retain the factory ride height. I am going to be ordering one along with lakewood 70/30 and I already have the 50/50 in the back. Man, you use to spin through 3rd and now only half way through 1st DAMN! I can't wait!
------------------ 1991 Lx sedan 5.0, 5spd, GT-40 Heads, Cobra intake, 73MM mass air, 65mm TB, FPR, 24lb injectors, E303, Headers,off road H-pipe, Flows, K&n , hurst, 3:55's, pullies, etc... Best ET 13.5 (2.15 60ft) Best MPH 103.9 On semi-bald street tires New mods! electric fan, nitto drag radials, mac upper and lower control arms, HD trac-loc, lakewood 50/50's on back, shift light, centerforce dual friction, and rebuilt heavy duty T5 |
03-04-2001, 03:11 AM | #7 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
I checked mine today
Its 27" at the front fenders. The driver rear is 26" and the pass rear is 27.5". What are yours rick? Sky ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's. 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) <A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b |
03-04-2001, 02:08 PM | #8 | |
Procharged!
Join Date: May 1999
Location: Hanover, PA
Posts: 1,539
|
Quote:
------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98 |
|
03-05-2001, 01:45 AM | #9 |
Registered Member
Join Date: Apr 1999
Location: St.Louis,MO
Posts: 274
|
The rear springs are different rates and as a result will sit different. Driving on the street will yeild unpredictable results in the rear.
I install a second bag in the left side so I could keep rear end stability on the street. Merely deflated to 5 psi at the track and aired up the right to what ever. Never deflate your bag to less than 5 psi when driving, it will damage the bag. Don't inflate to more than 35 psi (mfg recomendations). Mike ------------------ Live near St.Louis? Check out Mustang Muscle and Dyno in High Ridge, MO Check out my ride. |
03-10-2001, 09:56 PM | #10 |
Registered Member
Join Date: Feb 2000
Location: Flemington, NJ USA
Posts: 166
|
Skyman, the 0-110 in car video was killer!
|
03-11-2001, 04:17 AM | #11 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Thanks man!
sky ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. Added Eibach drag launch springs and 70/30's w/ 50/50's. 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) <A HREF="http://members.aol.com/lskymanl/burnout.mpg" TARGET=_b |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ques. about Drag launch springs | skiwesser | Windsor Power | 1 | 06-22-2004 10:06 PM |
Eibach drag springs + Tokico drag struts | Greystang302 | Windsor Power | 6 | 01-01-2002 01:46 AM |
Eibach Drag Launch Springs | glxstang | Windsor Power | 14 | 08-10-2001 01:12 AM |
car looks like 4x4 after drag launch springs | WADS56 | Blue Oval Lounge | 6 | 05-13-2001 02:04 AM |
4cyl. Springs & Shocks, Or 50/50s, 90/10 & Eibach Drag Kit??? | BowTie Eater 5 Liter | Windsor Power | 3 | 04-13-2001 05:46 AM |