MustangWorks.com : Ford Forums - View Single Post

eeh102582 · 03-04-2004, 11:46 PM

Hey guys im rebuilding my engine and im buying the kit from summit racing, here is the part number FEM-MHP173-030, if you dont want to look the pistons are

Vendor: Speed-Pro
Product Line: Speed-Pro POWERFORGED Pistons
Material: Forged Aluminum
Finish: Machined

Higher compression, longer life.

Ford: 302, 3.00 in. stroke, 5.090 in. connecting rod, flat top, forged, piston

Thanks to a special aluminum alloy that doesn't expand as much as other alloys, this POWERFORGED piston is designed to fit tight, providing the stability and ring control you need plus the strength you want. Plus, Speed-Pro added a ribbed skirt for better oil retention and included a new wrist pin.

MY Questions is will the e303 cam and 1.7 rollers work with these pistons or will the lift be too much, also will the 1.6 rollers work.
thanks alot

03-04-2004, 11:46 PM	#1
eeh102582 Registered Member Join Date: Feb 2004 Posts: 33	rebuilding engine, will cam fit Hey guys im rebuilding my engine and im buying the kit from summit racing, here is the part number FEM-MHP173-030, if you dont want to look the pistons are Vendor: Speed-Pro Product Line: Speed-Pro POWERFORGED Pistons Material: Forged Aluminum Finish: Machined Higher compression, longer life. Ford: 302, 3.00 in. stroke, 5.090 in. connecting rod, flat top, forged, piston Thanks to a special aluminum alloy that doesn't expand as much as other alloys, this POWERFORGED piston is designed to fit tight, providing the stability and ring control you need plus the strength you want. Plus, Speed-Pro added a ribbed skirt for better oil retention and included a new wrist pin. MY Questions is will the e303 cam and 1.7 rollers work with these pistons or will the lift be too much, also will the 1.6 rollers work. thanks alot