MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-23-2006, 07:38 PM   #1
Hozer 88GTConv
Registered Member
 
Hozer 88GTConv's Avatar
 
Join Date: Feb 2002
Location: Jacksonville, FL
Posts: 706
Default right 02 sensor voltage 5.0!

Today (raining) my right 02 started reading richer than hell 5.0vdc (which is max) and then, winding down slowly to about 1.5 vdc at cruise (2500 rpm @ 70 mph)...

the left does the same as always, boucing btwn .2 vdc - .7vdc (I know .46 is ideal but these are factory sensors, the wideband is going in this w-end)

any guesses? I'm taking it apart tomorrow...
__________________
1988 GT Convertible
331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta...
One week with new motor, two speeding tickets...joy
Hozer 88GTConv is offline   Reply With Quote
Old 02-24-2006, 11:44 AM   #2
Joel5.0
Registered Member
 
Joel5.0's Avatar
 
Join Date: Oct 2005
Location: Sabana Grande, Puerto Rico
Posts: 33
Default Re: right 02 sensor voltage 5.0!

Either the O2 went fubar (shorted thimble to heater, internal), or you have a short to power or VREF somewhere in the wiring. The O2s don't use 5vdc reference voltage, they produce their own. My 2¢.
__________________
ACRONYMS:
LUK=Let Us Know, GL=Good Luck, LMK=Let Me Know, JIC=Just In Case, BTSTDTRT=Been There Seen That Done That Repaired That and the classic... DILLIGAS=Do I Look Like I Give A S***

1986 Mustang GT w/T-Tops
NOW: 5.0L Stock SB, X303 Cam, 700 cfm DP Holley, 289 '66 Heads, 1.7 RR, Richmond Gear 4+1 Tranny, Centerforce DF, 2.73 Gears
WIP: 3.90 Gears, LS Overhaul, Adj. LCA's & UCA's (Granatelli), T-Top weather striping and rear braces bodywork
Joel5.0 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:22 AM.


SEARCH