Re: rocker arm help
two things about the noise. i used to run pedastal mount motorsport roller rockers. are they 1.6 or 1.7's? are your valve covers stock height, and last did you remove your oil baffle from under the filler neck. my 1.6's used to smack the baffle on my valve covers. i always heard noise from my roller rockers and was always told that was normal, and if they are 1.7's you have to use taller valve covers. hope this was helpful, good luck.
__________________
'89 GT hatch back
performer rpm intake, performer rpm cylinder heads, fms e-303 cam, kirban adj fp regulator, holley 65mm tb, harland sharp 1.6 roller rockers, alum driveshaft, 3.73 gears (283 rwhp, 303 rwtq new numbers with new heads)
|