95gt 1.7 Rocker Arm?????

sn95gt19 · 03-28-2002, 04:47 PM

i want to know if i would be able to use anything over 1.7 ratio roller rockers with edelbrock performer heads with 1.96 intake valve. I am going to be using a new stock cam to keep it stock sounding, but want to put the biggest possible rocker arms on. I will also be using .030 over dss pistons with stock compression ratio. if anyone can help me out,thanks

89 Cobra LX · 03-28-2002, 04:56 PM

1.72 RRs should work fine with the stock cam.

fiveohpatrol · 03-28-2002, 04:56 PM

The only ratio higher than 1.7 that I am aware of is a 1.72:1.

Using the stock cam with this, you should be fine.

03-28-2002, 04:47 PM	#1
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	95gt 1.7 Rocker Arm????? i want to know if i would be able to use anything over 1.7 ratio roller rockers with edelbrock performer heads with 1.96 intake valve. I am going to be using a new stock cam to keep it stock sounding, but want to put the biggest possible rocker arms on. I will also be using .030 over dss pistons with stock compression ratio. if anyone can help me out,thanks

03-28-2002, 04:56 PM	#2
89 Cobra LX Don Corlione Join Date: Jun 2001 Location: Omaha NE USA Posts: 491	1.72 RRs should work fine with the stock cam. __________________ Eric - 89 Mustang LX coupe 5 speed 302-Cobra Intake-GT40p heads-TFS stage 1 cam-FRPP 1.6 roller rockers-3:73 gears-KYB shocks and struts-Eibach Pro-kit-HPM Mega-bite upper and lower control arms-FRPP aluminum driveshaft-16x8 Chrome Cobra Rs R.H.C. #14

03-28-2002, 04:56 PM	#3
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	The only ratio higher than 1.7 that I am aware of is a 1.72:1. Using the stock cam with this, you should be fine. __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP! - no oil at rocker	matt cook	Windsor Power	2	05-22-2002 10:52 AM
TFS TW rocker stud Q	drudis	Windsor Power	0	01-22-2002 02:37 PM
Adjustable roller rocker problems	Greystang302	Windsor Power	0	05-14-2001 01:57 PM
Rocker Arm Adjustment	bcinyuz	Windsor Power	1	02-27-2001 02:05 AM