Rocker Question.

Mopar1 · 09-20-2002, 12:43 PM

This is a strange question at first. What affect on valve train geometry would happen if a swapped the 1.6 rockers w/ 1.5? Do they even make these for ford engines to fit stock heads (88-93). The camshaft thats in the engine rite now supposedly has a .572 lift. That's what the guy said when I bought it. I believe him because it does have a nasty lope at idle. I dont want to pull the cam rite now. I think the 1.5 if they are made might tone it down a little. At least until next year when I pull the engine.

Mopar1 · 09-20-2002, 09:02 PM

Apparently this is a stupid question..lol. No, I dont live on pluto.

09-20-2002, 12:43 PM	#1
Mopar1 Registered Member Join Date: Mar 2002 Location: Lakewood, Wa Posts: 161	Rocker Question. This is a strange question at first. What affect on valve train geometry would happen if a swapped the 1.6 rockers w/ 1.5? Do they even make these for ford engines to fit stock heads (88-93). The camshaft thats in the engine rite now supposedly has a .572 lift. That's what the guy said when I bought it. I believe him because it does have a nasty lope at idle. I dont want to pull the cam rite now. I think the 1.5 if they are made might tone it down a little. At least until next year when I pull the engine. __________________ '77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro

09-20-2002, 09:02 PM	#2
Mopar1 Registered Member Join Date: Mar 2002 Location: Lakewood, Wa Posts: 161	Apparently this is a stupid question..lol. No, I dont live on pluto. __________________ '77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roller rocker question?	HiFlow5 0	Windsor Power	1	05-18-2004 12:07 PM
Help! - Pedistal Rocker Question	Bobasaurus	Windsor Power	5	12-08-2002 10:56 AM
Rocker Arms Question	Falcons Talon	Windsor Power	1	08-11-2002 11:27 PM
Roller rocker question	DemonLp	Windsor Power	1	03-22-2001 04:19 AM
Rocker Panel Moldings Question	Matt683	Classic Mustangs	4	01-05-2001 02:46 PM