Roller Rocker Install Questions!

chris91LX · 11-12-2001, 05:11 PM

Ok, I've got the crane conversion kit in and the rockers on, but I'm not sure how to adjust the lock down nuts.
1. Should the nuts be tightened when both valves are closed?
2. Should the nut be tightened all the way and then the set screw tightened or do I back the nut off a little first?

And have I forgotten anything? Any advice, tips, comments and/or observations are welcome. This is the first time I've ever had the valve covers off a car so I'm a little geeked. Thanks in advance guys.

NewAge 5.0 · 11-12-2001, 05:16 PM

Ok I am not real sure but I think if you have the ones with the lil set screws on top you adjust rocker then lock down set screw.. Simple man

chris91LX · 11-12-2001, 09:03 PM

Yes they have set screws. I was worried that if I tighten the nut all the way it would interfere with the rocker actually rocking.

Another question I had was if I need to grease the rockers and pushrods or if just lubing them with oil would be fine.

11-12-2001, 05:11 PM	#1 (permalink)
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	Roller Rocker Install Questions! Ok, I've got the crane conversion kit in and the rockers on, but I'm not sure how to adjust the lock down nuts. 1. Should the nuts be tightened when both valves are closed? 2. Should the nut be tightened all the way and then the set screw tightened or do I back the nut off a little first? And have I forgotten anything? Any advice, tips, comments and/or observations are welcome. This is the first time I've ever had the valve covers off a car so I'm a little geeked. Thanks in advance guys. __________________ My Ford Club http://www.midwestfords.org/ Best time N/A 12.9 @ 107 1.711 60' 125 shot - 12.04 @ 113 1.59 60'

11-12-2001, 05:16 PM	#2 (permalink)
NewAge 5.0 Registered Member Join Date: Mar 1999 Location: Sanford NC USA Posts: 155	Ok I am not real sure but I think if you have the ones with the lil set screws on top you adjust rocker then lock down set screw.. Simple man __________________ 88 Hatch 10.60's @ 130 89 Hatch Not as fast but holds its own

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roller rocker question?	HiFlow5 0	Windsor Power	1	05-18-2004 01:07 PM
Quick questions on Explorer Intake install.	Falcons Talon	Windsor Power	2	08-21-2003 01:40 PM
New Gears, Install, and Questions	B2r3y	Windsor Power	6	02-21-2003 05:00 PM
Roller Rockers for my AFR's.....and install questions	dragstang86	Windsor Power	4	12-31-2002 08:18 PM
Roller Rocker install questions. (long)	chris91LX	Windsor Power	5	03-15-2001 09:32 PM

11-12-2001, 09:03 PM	#3 (permalink)
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	Yes they have set screws. I was worried that if I tighten the nut all the way it would interfere with the rocker actually rocking. Another question I had was if I need to grease the rockers and pushrods or if just lubing them with oil would be fine.

Sponsored Links