MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   rotors (http://forums.mustangworks.com/showthread.php?t=43304)

WildWheels 06-21-2004 03:57 PM

rotors
 
I need help on switching over to 5 lug wheels? I heard that i could use lincoln markvii rotors but what year? Thank you.

RDMumfts Stang 06-21-2004 06:50 PM

You can use 85-91 Mark VII rotors if you have a 87-93 5.0 Mustang. Pre 87 5.0s, which had puny 10" rotors, would need to have their spindles upgraded to the later model. Check out http://www.svo73mm.cjb.net./ it should answer all of your questions about your options for swapping to five-lugs. Note your limited wheel options with the Mark VII rotors.

WildWheels 06-23-2004 08:05 PM

rotors again
 
I'm using '94 17 + 8 inch six spoke wheels. Will the lincoln rotors work with this wheel? I think i have about 3 inch's from back side of lug nut holes to the center cap. any help is good help.

RDMumfts Stang 06-24-2004 06:43 PM

Not according to the site in my previous reply. You will need to get 1994-95 SN95 spindles, hubs, calipers and rotors if you want to use your center caps on the front.

drudis 06-28-2004 08:52 AM

The 5-lug Ford Motorsport will get the 10" 4-lugs to 11" 5-lugs like I did on my 1978 Zephyr Z-7 with a 351W:
http://www.dariusrudis.com/mustang/zephyr/zephyr8.jpg

If you with to go 5-lug, see http://www.svo73mm.cjb.net for excellent write-ups on how to convert.

I personally did the 1989 4-lug to M2300K Cobra 13" with PBR calipers (soon to install the new Brembos I just bought).
http://www.dariusrudis.com/junk/brakes_3.jpg


All times are GMT -5. The time now is 09:25 PM.