MustangWorks.com : Ford Forums - View Single Post

82 GT · 09-03-2002, 03:11 PM

If you want to do it the cheap way then buy some sheet metal and pop rivits and patch the holes that way. Then go around the edges of the patch with some sealer.
If the holes are pretty large then I would have a shop weld patches in, especially if the metal is getting thin under the seats.
Since you said this is a budget then new floor boards are out of the question...huh?

09-03-2002, 03:11 PM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	If you want to do it the cheap way then buy some sheet metal and pop rivits and patch the holes that way. Then go around the edges of the patch with some sealer. If the holes are pretty large then I would have a shop weld patches in, especially if the metal is getting thin under the seats. Since you said this is a budget then new floor boards are out of the question...huh? __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.