SC T-Bird or SVO Mustang Injector size
 

Does anybody know what the factory injector sizes are for the SC Thunderbirds and/or the SVO Mustangs?

I see that both Jeg's and Summit have dropped FRP injectors larger than 30#'s and have started carrying Holley injectors which are damn near 80 bucks a pop! And they dont indicate if they are a superior design, are flow tested, ect? Ordinarily I might go and spend the cash, but without any solid evidence to the contrary, I can't see spending an extra 30 bucks an injector if I can get a 36# injector for about 50 bucks a pop from auto store that has the same qaulity?

The SVOs had either 36#s or 30#s. I THINK the T-Bird SCs had 24#s...maybe 30#s but I kinda doubt it.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

For some reason I though they were 14 pound injectors. That's what the guy that sold us our SVO said. I don't know I'm still learning about the SVO. I do remember him saying that he used some SC injectors because they were bigger by 2 pounds.

------------------
67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, manley valves, v-matic hurst shifter, edelbrock performer nitrous, carter electric fuel pump, ignitor coil, solid motor mounts, magna racing suspension, poly urathane bushings, und

Super Coupes had 30s up til about '94, when they received 36s.

SVOs had injectors which were much bigger than the 5.0 injectors...I believe they were 30s.

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

good, I'll check on that latter on today, My brother works at autozone and he told me they have a few SVO injectors in stock. I'll ask and see if they have any 95 and up injectors for an SC t-bird.