![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
![]() What is the best method to separate ball joints and tie rod ends?
I have heard of using ball joint forks, using a hammer and a twp prong puller. I don't think the hammer is a good choice. I also heard that the lower ball joints on 79-93 mustangs are not replaceable unless you replace the whole control arms. Is that true? I want to use the best tool that won't damage anything in case I can use those parts again.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
![]() |
![]() |
|
|