serpentine belt problem...
i was originally running the stock serpentine setup with a vortech blower and all accessories. just added a march A/C eliminator bracket and now my serpentine belt isnt clearing the idler pulley and water pump pulley. the idler is mounted as directed by vortech, but since i removed the a/c was removed the tensioner hits the water pulley as the belt goes to the power steering. not sure if i need to mount the tensioner on the ac eliminator bracket or what. any ideas?
__________________
88 Conv Vortech S-trim 2.5" 10-rib pulley, 332 stroker w/ Cat forged crank, forged JE flat-tops, forged rods, 10.25:1 comp, DSS girdle, edelbrock heads, Omega valvetrain, Lunati custom cam, extrude honed Cobra intake, 70mm T-body, Pro-M 77, bypass valve, dual Walbro 255 lph in tank pumps, an -8 fuel hose, aeromotive fuel rails/regulater. 42# inj, MSD ingniton/boost retard, JBA headers, flowmasters, full Griggs GR-40R suspension (K-member, torque arm, panhard bar, subframes, strut brace) Centerforce clutch, Tremec, Auburn posi locker, moser axles, Baer brakes/rotors, 17" cobra R wheels, custom body/roll bar
|