Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-17-2003, 03:24 PM
|
#1 |
|
YOU HAVE NO MARBLES!!!!!!
Join Date: Aug 2000
Location: Jonesboro,Georgia,USA (Providence, Ri)
Posts: 868
|
Narrowed heads down to Two choices.
Here is my predicament. AFR 225's Vs. Brodix 201/202"s
The Afr's consistanly out flow the Brodix heads in the Exhaust. But are almost equal at .600, But until then alot lower in the lowere lift numbers. The Brodix heads, however, spank the AFR's in the intaka side all the way through the range, and will Flow 370 to AFR's 312 at .600. My cam is 112 LS 240 intake 248 exhaust. And lifts .576 in. .585 ex. I am going to use 1.7 rockes on my 408 and will be spinning this thing to 7,000. Will the restrictive exhaust of the Brodix make them not worth the extra money b/c they will not out perform the AFR's by enough? Especialy seeing as how my exhaust is favored in Lift and Duration.mAny thoughts? JOn Light Em Up!!!  Last edited by NoSlow5.0; 11-17-2003 at 03:40 PM.. |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New FRP Heads for 96 - 98 4.6 | surfbeast | Modular Madness | 9 | 11-21-2002 07:02 PM |
| will 99-2002 cams out of the pi heads fit in the 96-98 stock heads | slow98 | Modular Madness | 6 | 10-25-2002 04:28 PM |
| GT-40 heads | 5.0 Pony | Windsor Power | 1 | 09-10-2002 10:26 PM |
| My NEW replacement Holley heads are different! | Rick 91GT | Windsor Power | 8 | 04-23-2001 06:45 AM |
| Which heads are beter? | patman | Classic Mustangs | 3 | 12-02-1999 03:42 AM |