Setting up a 8lb paxton
Can anyone please tell me what I might need for a 8lb blower setup.
I have a 30#injector FMU and 24#FMU. I also have an adj fuel reg and a 155lp intank fuel pump. But stock 19#injectors I will be running a 50 shot wet system at the same time. Do I need a new MAF and injectors and a 225LPH intank. Thanks |
Re: Setting up a 8lb paxton
Hey,
for a blower and N2o set up it is imperative to have everything matched and in good shape. I would definitely use the 255 LPH pump and with both power adders I would at the very minimum use #30lb injectors. I would also make sure that the FMU is matched to the injectors to be sure you have the correct rate of gain. Some I know don't even bother with the FMU and go straight to electronic tuning with a wide band O2 sensor and hand held tuner. Of course have the best MAF matched to the injectors. |
All times are GMT -5. The time now is 07:02 AM. |