View Single Post
Old 12-22-2001, 12:07 PM   #2
speedytang
Registered Member
 
Join Date: Oct 1999
Location: Marengo, Ohio.USA
Posts: 135
Default

The kit is for 19lb injectors and the FMU also can widen the injectors using this setup to make them think they are 36lb injectors. Now the best part of using a FMU is that you will not be over rich around town when out of boost but you will be pushing your small injectors because with the FMU you will be 80lbs on your fuel pressure guage instead of 40lbs which is the stock setting. Now for years I have pushed injectors to 125% cycle or more with no problems and many have also and then if you need a part it is alot easier to get a 19lb injector from a part store or trying to find someone to sell you a single 36lb injector. The only thing you should do is have a 255lph fuel pump in the tank. The Procharger kit does come with a pump correct? If so just install the pump and enjoy the fun.
speedytang is offline   Reply With Quote