MustangWorks.com : Ford Forums - View Single Post

John Cummins · 12-24-2001, 07:44 PM

I'm building 302 for nitrous and a supercharger. I just started to install my rod bearings and I noticed holes in the bearings. Not just one all the rod bearing. The stock rod bearings and bearings at worked i looked at dont have these holes. I called Summit tech line and they said I did have the right bearings. He said they are possibly for dowl pins on some rods. I'm scared shitless I'm going to spin bearing. If these are here for a reason somebody let me know, thank you Jason

12-24-2001, 07:44 PM	#1
John Cummins Registered Member Join Date: May 1999 Posts: 231	What's up with my rod bearings I'm building 302 for nitrous and a supercharger. I just started to install my rod bearings and I noticed holes in the bearings. Not just one all the rod bearing. The stock rod bearings and bearings at worked i looked at dont have these holes. I called Summit tech line and they said I did have the right bearings. He said they are possibly for dowl pins on some rods. I'm scared shitless I'm going to spin bearing. If these are here for a reason somebody let me know, thank you Jason __________________ 89 LX convertible w/ MAC equal length headers and flowpath catback, Black Magic electric fan, FMS aluminum radiator, 180 thermostat, K&N, removed silencer, 13 timing, FMS 9mm wires, Accel supercoil, FMS 110lph fuel pump, 130 amp alternator, FMS underdrives, Pro. 5.0 shifter, Steeda G-Trac 1 suspension. 3.73's and subs to be installed soon!!!