Sorry for not responding sooner. I bought a TPS sensor which fixed my idling problem. I have one of those IA bypass thingies and my idle was still erratic here and there.WOW! When I installed the new TPS sensor, my battery voltage gauge went up and the car seems to have more power. I looked closely at the old sensor and noticed the + & - wires were exposed by the plastic casing. Also they were corroded. This was probrably a result from adjusting the sensor with a voltage meter. Anyway, I haven't driven the car yet to see if maybe my car had a lack of charge to the battery. I'm gonna look into all the options and I will post back. Thank you.
Just me
91'lx, 302 block, crank pulley, no smog, short belt, Wolverine 1087 cam, 15 deg timing, TFS TW heads, motorsport 1.6 3/8 stud RR, ARP studs, TFS chrome hardened push rods, 24lb inj, BBK 255lph fuel pump, Areomotive billet adj FPR, Performer RPM intake(ported to 75mm), 1" spacer, Motorsport polished tall valve covers(love em), Pro-M 77, Acufab 75mm TB, Ford idle air bypass valve, K&N conical, MSD 6AL and coil, 9mm MS cables, NGK bkr5e 11 plugs@55, motorsport 3 core radiator,160 thermostat, Hurst short throw, motorsport 410 gears, aluminum drive shaft,Kenny brown Subs, Mac 1 3/4"Long tube, custom 3"off road xpipe, 2 chamber Flow Masters, 3 1/2" tailpipes HAL tubular K-member, KYB struts and shocks, Eibach springs, Steeda 2.5" Cowl, Steeda rear wing, black Dupont centari acrylic enamel paint. Going for an electric fan setup with a blower.
|