the gasket you will be getting with it is too big for the intake ports on the stock heads. if the intake is ported to that gasket you will have a big lip when the intake port meets the head. this will cause a lot of turbulance.
its a simple project, but i wouldnt even bother wasting your time on it now. you will not see any gains. i didnt!
once you get some heads, then put it on. i just wished i had waited for my GT-40's before i put it on my stock heads.
hope i helped,
adam
__________________
90 GT black/ grey leather
ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc....
http://avbcon12.stangnet.com
|