MustangWorks.com : Ford Forums - View Single Post

avbcon12 · 01-23-2002, 04:47 PM

im gonna replace the headers on my 90 GT (stock heads) and wonder if it is possible to take the thermactor bumps out whil the heads are on the car? i will shove a rag in the exhaust port so no shavings will get in the head. and will use a vacuum to get all the shavings out.

is this even possible? or better yet wise? could it be done with a dremel?

thanks for the replies,
adam

01-23-2002, 04:47 PM	#1
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	need questions anwered..... im gonna replace the headers on my 90 GT (stock heads) and wonder if it is possible to take the thermactor bumps out whil the heads are on the car? i will shove a rag in the exhaust port so no shavings will get in the head. and will use a vacuum to get all the shavings out. is this even possible? or better yet wise? could it be done with a dremel? thanks for the replies, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com