MustangWorks.com : Ford Forums - View Single Post

Idhomustang · 02-10-2002, 04:09 PM

Sorry Dude,

I believe you are in over your head. The castings are different, completely different. You stang has Upper and lower control arms the Explore doesn't. That alone would make the deal extremely difficult unless you are a Master welder and could fab up all the brakets and some how manage to fit them properly.
While this isn't impossible, your Dad is headed down the right path, just make sure the gearing is the same front and rear and he should be ok.

Mac..

02-10-2002, 04:09 PM	#2
Idhomustang Registered Member Join Date: Sep 1999 Location: boise,idaho Posts: 220	Nope! Sorry Dude, I believe you are in over your head. The castings are different, completely different. You stang has Upper and lower control arms the Explore doesn't. That alone would make the deal extremely difficult unless you are a Master welder and could fab up all the brakets and some how manage to fit them properly. While this isn't impossible, your Dad is headed down the right path, just make sure the gearing is the same front and rear and he should be ok. Mac.. __________________ 393,9.5" 351W,830 Holley,Victor Jr,Home made Cool Air Pan, Pro Billet MSD, MSD 6AL, XE 284H Xtr-Com cam, 240-246 @.050, 540-544, M/T Et streets, Mac Upper and Lower, Control Arms, 3:73 US Gear,Mini Spool, Eagle Long rods, Mac Windage tray, KB Pistons, Scat crank, 4000 rpm stall convertor, C-4 trans, Airflow Research 185cc, Hooker long tubes 3", exhaust, S&W 6 point roll cage, 11.2 at 121 mph.