Thank you! but imgoingcrazyaboutthis... On wednesday I will leave the hole axle to a expert. The shims I got is smaller and it looks like it should sit on the diff, inside of the bearings. On left and right side of the diff and the two bolts on each side. There I have one shims or what it is around 3-4mm. I tought this was the place to shims the diff...
------------------
GT -87, *Hurst shifter,
*Mac shorty 1 5/8, *H-pipes, *3,55 FM gear, This
14,61 and 95,59mph
*the 1/4 times is before this mods.
If you like longdistance racing look at <A HREF="http://www.slc.se