[srv1]

i was told for the fox body to use 94-95 spindles only cause the track with on the 96 and up is wider making the wheels stick out farther which means rolling the lip on the fender. well i got the spindles, and you guys are right, no problems that i can see. Darius, should i use the 96 and up? what is the problem, if any, using the 94-95's? oh and Chatcher. in my personal opinion and experience, i dont believe in using washers to solve a problem. that ball joint has to sit in the spindle to seat. i dont believe the washers are going to hold up after time, meaning the taper on the seat of the ball join is going to come loose. i am converting to 94 ball joints. no messing around. i was told by many it is a direct swap. Darius, i have a couple of questions for you. i will email you.