MustangWorks.com : Ford Forums - View Single Post - in-car head swap question?

saywhenn94 · 03-23-2002, 08:46 AM

I usually stuff the bores with rags or paper towels and use scotch brite pads to scuff the surface. Then make sure you vaccum any debris, it work's for me. I don't think you will need to retorque the head gaskets, I think thats for copper gaskets but I could be wrong, hope this helps.

03-23-2002, 08:46 AM	#2
saywhenn94 Registered Member Join Date: Feb 2002 Location: Warren, Mi. Posts: 50	I usually stuff the bores with rags or paper towels and use scotch brite pads to scuff the surface. Then make sure you vaccum any debris, it work's for me. I don't think you will need to retorque the head gaskets, I think thats for copper gaskets but I could be wrong, hope this helps. __________________ 91 GT Convertable, 306, TFS TW heads, B41 cam, Holley Systemax, S-Trim, Bassani LT's, and Flo's