There is O-rings on both sides of the injecters. They get old and crack if your not careful. I put a little grease on the o-rings to make sure they don't get hung up in the rails or manifold when installing.
If you did not take off the rails and just moved them to the side you may have broke the fuel line. They are plastic and could break or kink if not careful.
__________________
79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor
93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe
Ricer hater's club member #49
|