MustangWorks.com : Ford Forums - View Single Post

jimberg · 04-11-2002, 08:01 AM

I've found that what Jeff says is true. I used the same spacer and it works great. If you've had non-Ford gears in there, then I can probably tell you how to do it later tonight when I find an article on the subject. In the mean time, measure the head of the pinion gear. That measurement will be needed to calculate the pinion depth.

04-11-2002, 08:01 AM	#3
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	I've found that what Jeff says is true. I used the same spacer and it works great. If you've had non-Ford gears in there, then I can probably tell you how to do it later tonight when I find an article on the subject. In the mean time, measure the head of the pinion gear. That measurement will be needed to calculate the pinion depth. __________________ 351W 89 Mustang GT Convertible Last edited by jimberg; 04-11-2002 at 10:51 AM..