another thing to keep in mind is the ticking may be comming from your lifters. if they are siezed or arent filling with oil they will make a noise. both of you seem to have pedistol mount rockers. which dont usually need adjusting ( unless they were installed wrong). if it is pretty loud (enough to be concerned) i would not see if they are "tight" but see if the preload is set right. if it isnt that can cause valve float as well as a lifter bottoming out.
take care,
adam
__________________
90 GT black/ grey leather
ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc....
http://avbcon12.stangnet.com
|