MustangWorks.com : Ford Forums - View Single Post - ??? For anyone who has stripped thier engine bay.

byrnech · 04-22-2002, 05:11 PM

In light of taking out my old motor I decided to scrub everything down and re-paint it all. I took out two sensors on the passenger side by the firewall. The have electrical plugs, and vacume plugs. Is having the electrical connectors unhooked going to cause driveability issues? I have the name of the soleniods if this will help. They are emisssions related and are the -Dual AIR Control Solenoids, and the -Secondary Air Injection (AIR) Solenoid Assembly. Thanks for any input.

-Chris

04-22-2002, 05:11 PM	#1
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	??? For anyone who has stripped thier engine bay. In light of taking out my old motor I decided to scrub everything down and re-paint it all. I took out two sensors on the passenger side by the firewall. The have electrical plugs, and vacume plugs. Is having the electrical connectors unhooked going to cause driveability issues? I have the name of the soleniods if this will help. They are emisssions related and are the -Dual AIR Control Solenoids, and the -Secondary Air Injection (AIR) Solenoid Assembly. Thanks for any input. -Chris __________________ 331 10:1, AFR 185's, TFS-R intake