well i know my FPR doesnt leak any, but the PCV is interesting...
right now i have the PCV hooked up like normal, but the tube that goes to the TB from the valve cover is no longer there. i have a breather on the valve cover. the reason i did this id because i have a TB from an explorer (no provision for that tube). so i just stuck a breather on the valve cover.
what should i try first to fix this IF its the problem...?
thanks,
adam
__________________
90 GT black/ grey leather
ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc....
http://avbcon12.stangnet.com
|