MustangWorks.com : Ford Forums - View Single Post - Approx. what will this combo run in the 1/4?

tireburner163 · 07-18-2002, 10:43 PM

Well you should be in the low 15's.

Here are some suggestions I have for you combo...

Ditch the 70mm TB it's WAY to big. Get a 65mm they are still good up to 500hp.

Get a set of E7 heads, your heads suck *** for flow. Port em too while your at it. Or you could pick up a set of GT-40P's. They are $630 from Central Coast Mustang, that includes a stage 1 port, stainless valves, and springs good to .570 lift.

You can get a explorer intake for $275 new from Central Coast Mustang, it only flows 10cfm less than a Cobra. You might as well get that ported too.

You need a stall BAD, I suggest a 2800-3000.

07-18-2002, 10:43 PM	#7
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	Well you should be in the low 15's. Here are some suggestions I have for you combo... Ditch the 70mm TB it's WAY to big. Get a 65mm they are still good up to 500hp. Get a set of E7 heads, your heads suck *** for flow. Port em too while your at it. Or you could pick up a set of GT-40P's. They are $630 from Central Coast Mustang, that includes a stage 1 port, stainless valves, and springs good to .570 lift. You can get a explorer intake for $275 new from Central Coast Mustang, it only flows 10cfm less than a Cobra. You might as well get that ported too. You need a stall BAD, I suggest a 2800-3000. __________________ 1987 Buick T-type 1998 HD Electra Elide