Quote:
Originally posted by Bad89stang
Just make sure that the axle is completely hanging with only the control arms bolted up. Undo the shocks so it will pivot down a little more. It should line up perfectly with plenty of room to move around the swaybar. Just use a jack on one end while you line up the other side. Hope this helps.
|
Yeah, I have the shocks bolted up already. You would think I would have learned, after I had to unbolt the one shock already to line up the opposite lower control arm mount bolt. Lol....I alomost forgot the swaybar completely...I was getting ready to downjack and saw it sitting there.
Anyway, good idea. Ill unbolt the shocks again and see if it gives me the extra movement needed to facilitate line up of mount holes.
later