MustangWorks.com : Ford Forums - View Single Post - putting together new combo, need opinions

SlowGT · 08-07-2002, 11:34 AM

I've got World Product Windsor Jr's with the same intake and cam on a stock bottom end. Got plenty of piston-to-valve clearance. I think they're available in aluminum. I'm gonna put a Kenne Bell on it this winter. I'm going to try 6# and see what happens. The Jr's have a 58cc chamber. Best I can calculate without actual measurements is a compression ratio of 10.4:1 with a FelPro gasket. I don't recall the gasket #.

Good luck.

08-07-2002, 11:34 AM	#2
SlowGT Registered Member Join Date: Jun 1999 Location: Columbia Co, PA Posts: 303	I've got World Product Windsor Jr's with the same intake and cam on a stock bottom end. Got plenty of piston-to-valve clearance. I think they're available in aluminum. I'm gonna put a Kenne Bell on it this winter. I'm going to try 6# and see what happens. The Jr's have a 58cc chamber. Best I can calculate without actual measurements is a compression ratio of 10.4:1 with a FelPro gasket. I don't recall the gasket #. Good luck. __________________ Old Slow GT New Slow GT--> under construction Latest Addition: 95 Cobra R, #73, bone stock, ~6100 miles.