MustangWorks.com : Ford Forums - View Single Post

Stang951 · 08-23-2002, 08:32 AM

Since the water pump was brought up, is there any flow difference between the Edelbrock and the FRPP? I have the Griffin 31X19 aluminum, Mark VIII fan, 180 Hi-flow thermostat and 2 bottles of water wetter with all water and still run 180-195 without a/c in no traffic.

08-23-2002, 08:32 AM	#16
Stang951 Registered Member Join Date: Apr 2001 Location: Metairie, La. USA Posts: 132	Since the water pump was brought up, is there any flow difference between the Edelbrock and the FRPP? I have the Griffin 31X19 aluminum, Mark VIII fan, 180 Hi-flow thermostat and 2 bottles of water wetter with all water and still run 180-195 without a/c in no traffic. __________________ Engine: 1990 5.8 / Edelbrock Performer set-up MSD ignition Suspension: Maximum Motorsports Caster-Camber Plates / Maximum Motorsports adjustable lower control arms / FRPP heavy duty upper control arms / Tokico Illumina Shocks and Struts / Ground Pounder Coil Over conversion kit front / Steeda cross brace sub-frame connectors / Drivetrain: Tremec 3550 trans / Steeda Tri-Ax shifter / Spec Stage II clutch and pressure plate / Spec aluminum flywheel / 5.8 in the hole