MustangWorks.com : Ford Forums - View Single Post

429mustang · 10-01-2002, 09:34 PM

Regardless of the heads, I'd definitely do some port work (matching, polishing,etc.). The kits from standard abrasives is good, plus only costs around $40.00, pretty cheap hp with a little time spent. Check out standard abrasives site, they give you a good idea about what to do. Also, if your gonna open up any ports cosiderably, you may want to get an all metal grinding bit form sears, they don't get clogged up and get trashed as quick as the sanding bits.

10-01-2002, 09:34 PM	#5
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	Regardless of the heads, I'd definitely do some port work (matching, polishing,etc.). The kits from standard abrasives is good, plus only costs around $40.00, pretty cheap hp with a little time spent. Check out standard abrasives site, they give you a good idea about what to do. Also, if your gonna open up any ports cosiderably, you may want to get an all metal grinding bit form sears, they don't get clogged up and get trashed as quick as the sanding bits. __________________ 1990 Notchback: BBK Ceramic Coated Full length headers, Dr. Gas 3"- 2 1/2" x-pipe, Flowmaster 40's/turndowns.