MustangWorks.com : Ford Forums - View Single Post

'89GTStang · 10-10-2002, 03:26 PM

I have used the greese before. It's a lil messy but it does work. I think I used a large bolt and a lil tape to get the exact size right. came out fairly easy. I had a tool but it didn't work very well because it was just the outter race of the bearing left in there. the rollers and the center completely failed and were in peices. I think the previous owner tightened the bolts on the trans. down and made it fit instead of lining it up correctly. I could also see the soap working and not be quite as messy. Either way Good Luck!!

10-10-2002, 03:26 PM	#6
'89GTStang Registered Member Join Date: Apr 1999 Location: greenwood, ar Posts: 118	I have used the greese before. It's a lil messy but it does work. I think I used a large bolt and a lil tape to get the exact size right. came out fairly easy. I had a tool but it didn't work very well because it was just the outter race of the bearing left in there. the rollers and the center completely failed and were in peices. I think the previous owner tightened the bolts on the trans. down and made it fit instead of lining it up correctly. I could also see the soap working and not be quite as messy. Either way Good Luck!! __________________ '89 GT K&N, Twisted Wedge heads, TFS intake,FMS 1.7 rockers, Trick Flow stage 1 cam(221/225 .530in\.542in) , 3.73's, headers, off road H-pipe, Flowmasters, FMS Clutch, Tremec, PRO-5.0, FMS driveshaft, fluidyne alum. radiator, and more to come.