MustangWorks.com : Ford Forums - View Single Post

Coupe Devil · 12-13-2002, 11:03 AM

Ok, buying a set of gt-40's ( thanks Dragstang ) they are complete minus the rockers. Now I have the stock 86 model cam in the engine now.. Now would I be better off to buy an aftermarket cam and go with some 1.6 ratio rockers.. buy some 1.7 ratio rockers and stay with the stock cam??? or buy 1.7's and go with an aftermarket cam.. The heads are in stock form now but I will port them and the intake while engine is out of car for swapping.. Any other ideas will be appreciated. I would like to run a hotter cam that stock and might mill hte heads to get comp up for spraying.. just need more opinions.

Thanks
Bradley

12-13-2002, 11:03 AM	#1
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Roller rockers and which cam??'s Ok, buying a set of gt-40's ( thanks Dragstang ) they are complete minus the rockers. Now I have the stock 86 model cam in the engine now.. Now would I be better off to buy an aftermarket cam and go with some 1.6 ratio rockers.. buy some 1.7 ratio rockers and stay with the stock cam??? or buy 1.7's and go with an aftermarket cam.. The heads are in stock form now but I will port them and the intake while engine is out of car for swapping.. Any other ideas will be appreciated. I would like to run a hotter cam that stock and might mill hte heads to get comp up for spraying.. just need more opinions. Thanks Bradley __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator