MustangWorks.com : Ford Forums - View Single Post

Jeff7477 · 07-06-2001, 12:15 AM

After I was done replacing my EGR valve, i thought i would check to see what kind of vacuum it needs. i started the car and let it idle. I put my finger over the Vacuum line and didn't feel much. I gave it a little throttle and could feel a little pull on my finger. I then pulled the line off the Fuel Pressure Regulator and put my finger over it. At idle it had enough to keep my finger stuck on it. Had lots more pull than the EGR vacuum. Should it be this way, or is there a vacuum problem somewhere?

07-06-2001, 12:15 AM	#1
Jeff7477 Registered Member Join Date: Jun 2001 Location: Lincoln, Nebraska USA Posts: 67	Vacuum After I was done replacing my EGR valve, i thought i would check to see what kind of vacuum it needs. i started the car and let it idle. I put my finger over the Vacuum line and didn't feel much. I gave it a little throttle and could feel a little pull on my finger. I then pulled the line off the Fuel Pressure Regulator and put my finger over it. At idle it had enough to keep my finger stuck on it. Had lots more pull than the EGR vacuum. Should it be this way, or is there a vacuum problem somewhere?