Sounds good but I still recomend a set of studs. With aluminum heads you want to make sure that you get a even clamping force on all the bolts to prevent any warpage. Studs will keep it almost exact with the moly lube. Tighten from the inside out in increments of 15ftlbs till the uppers hit 80ftlbs and the lowers 75ftlbs. Also use thread sealer where they go in the block. 
__________________
79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor
93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe
Ricer hater's club member #49
|