Sounds like a good combo. I agree that intake would better with RPM or torker, the cam with 108 center and that duration is going to be bit much with 2100 convertor, at least 2600 or 2800 would be much better . One other thing to look for is a way of valve adjustment (screw in studs & guide plates would be best) I had a 85 stang back in 1989 w/ 351 030 over (060 is getting a little thin) torker 2, 750 holley, 9.5 comp. crane commander cam 224, 234 at 50 110 ceterline 69 heads ported with studs and guide plate, 1.6 rollers 373 gears and 2800 converter went 12.54 @ 105. good luck
__________________
Bill Heiser
90 Convertable 5.0 LX, ported E7s w/ THumper valve job, TFS street, FR 65mm TB, B cam w/1.7 cobra rockers, kirban AFPR, Mac CAI, Mac Headers, off road h, 3 chamber flows, Crane ign. box, 3:73s, Art Carr AOD & 2600 converter
|