Quote:
Originally posted by bigred90gt
Just out of curiosity, what is the best thing to clean them with? Also, if you pull the heads off with the rockers still in place, and put the same pushrods and lifters back in the same places, do you have to take them off and re-adjust them when you put the heads back on? It may sound like a dumb question, but I would like to know. Thanks.
Caymon
|
A wire brush does the job real nice. If you pull the heads without removing the rocker arms, when you go to reinstall, you will have the pushrods forcing the rocker arms up, thus you wont be able to seat the head correctly and wont get a good torque reading.