The engine will not turn over unless I pull the middle wire on the distributor and let it ark. The engine doesn't want to run unless you floor it and then it will shut down. The ECT is brand new. I tested it by measuring accross both terminals and received 2 volts. With the sensor connected and koeo I back probed through the wiring harness and found the same results.
I cleared the codes and try to run a KOER test and the scanner says that I'm not able to keep the engine running.
One day I drove the car around and was able to get a lot of KOEO codes. I will post to night. PKRWUD thankx for your help. I am clueless and really need your help.
