That looks like a 1250 size port (1.15" x 2.0") measure it and if it's much bigger than the E7 head (1.05" x 1.90") you;ll have some "lip" of the head showing at the end of the intake runner. If it's well centered and only hangs out like 5 thousandths or so, It shouldn't hurt too bad.
__________________
Tom (Torque) Moss
88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE).
http://www.fastlanecars.com/
|