[Dark_5.0]

Ok picture this in your head. On an 87 coupe on the drivers side of the engine bay right by the firewall there are to connectors that go to the dash harness a black one and a gray one.

I converted this car over to mass air and on the harness I used there are not two connectors to plug to the dash harness there is only one and it is a brownish red color. I plugged it into the gray connector just to see if it would work without the black one plugged in Everything works except the fuel pump. So I am assuming the black connector goes to the fuel pump.

How do I hot wire the fuel pump so that it operates normally?

Please...I need help bad.