Quote:
Originally posted by 289
Question
I'm putting in a steeda #19 Cam with a .480 lift and putin 1.72 SVO roller rockers on that. Which I'm told that the lift will be .510 I'm putting Crane valve springs on. I was wondering is my lift going to be ok with piston to valve clearence.
Thanks
|
Your total lift will be .516, not .510.
Calculated as follows:
.480 / 1.6 = .300
.300 x 1.72 = .516
Lift would be .510 with a 1.7 rr.
E