Quote:
Originally posted by BaLListic
basically this is gonna be an EFI corner carving street car... Im not very interested in drag racing mostly just interested in having a very high horsepower super car.... Looking at the sportsman 2 block with a set of EFI heads a CSS or CHP 408 rotating assembly. Ontop of that a set of 205cc AFR heads with a custom grind hydraulic roller cam with a Victor 5.0EFI intake or a Spyder... Bit undecided on alot of my components.... The other things im having issue's with is beefing up the chassis... What should i do to prepare for this? sub frames and beefing up the torque boxes? other that that i dunno... Im guessing ill need a new rear end and transmission eventually also... for the tranny i believe ill probally just get a world class T-5 or a TKO as far as the rear end i have no idea.... basically thats my setup im looking at doing... Hopefully it will work out and thanks for your input and suggestions are welcome
|
\
Hello, well I would recommened some sort of chassis reinforcement, like a street cage or something, to that nature. Try to get the car scaled so the weight is as close to 50/50 balance. Ohh yea plus some huge brakes too!
Good luck