Found out what my mystery cam is.
Im doing a cam change in the mustang. I havent ordered my replacement cam yet. So, tonite I started to prep the vehicle by taking the old one out. I always new it was big cam, but ****;
Noway in hell would I put this cam in a daily driver.
Lunati 51012
Duration advertised: 290/300
@.050 232/242
Lift; .544/.560
LSA 112
Powerband 2800- 6500
(This car has been my daily driver for 1.5 years. It got 18mpg on the highway and 8mpg in the city.)
Now I am stuck. I was going to order the compu cam 2020 208/216 and .530/.530 lift (179.00). Now I dont know. I didnt think the guy I bought the car from put that big a cam in it. Summit has the Trick flow stage 1 for 139.00. I am not looking for anything special and a bargin cam would do fine.
Your suggestions please?
__________________
'77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs
(15.65@88 3900lbs)
'91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood.
3420 Lbs w/ 220 (me) and 13 gal gas.
'02 SS Camaro
|