MustangWorks.com : Ford Forums - View Single Post

7-UP BILL · 02-25-2004, 11:39 AM

When I did my 3G upgrade (PA Perf), I needed to trim the threaded bolt hole tab to fit the mounting bracket from my S-Trim kit. Not sure if you have a S/C or not but wanted to give my $.02 on that issue. Good luck
One other thing, be sure to upgrade the wire from the alt to the starter relay, a 4awg wire with a 200 amp fuse is what PA gives you (optionally).

02-25-2004, 11:39 AM	#5
7-UP BILL Registered Member Join Date: Aug 2000 Location: Burlington, NJ USA Posts: 21	When I did my 3G upgrade (PA Perf), I needed to trim the threaded bolt hole tab to fit the mounting bracket from my S-Trim kit. Not sure if you have a S/C or not but wanted to give my $.02 on that issue. Good luck One other thing, be sure to upgrade the wire from the alt to the starter relay, a 4awg wire with a 200 amp fuse is what PA gives you (optionally). __________________ 1990 7-UP Mustang S-Trim,Edelbrock,GT-40, Isky roller cam,Tremec,Torsen diff 31 splines,4 wheel disc and a whole bunch more...