Quote:
Originally posted by sedanman
Stage 2 is big and won't work with a stock shortblock it is something like
542 563 224/236
|
I'm running a stock shortblock that is decked, and with my 1.90/1.60 Edelbrocks that are milled I had to do very and I mean very slight enlarging of the valve reliefs. If you're using a stock bottom end that's not decked and heads that are 1.90/1.60 and not milled, then (always check) it should work.
Its a pretty mean idling cam, and its on a 112 LSA. I like it since it pulls from 2,500 to 6,500 without a problem. Keep in mind I'm running it in a carb'd car so I don't know how the EFI system would respond to it.